COMMON DRYSUIT MYTHS
In scuba diving in general we are constantly plagued by false impressions and stories that have been handed down from one person to another, most of which have been embellished upon by the storytellers whose only error is the desire to make a story more interesting.
The most common myths regarding drysuit diving.
DRYSUITS KEEP YOU WARM!
For the most part this is an incorrect statement. The drysuit itself, with the exception of the "foam neoprene" suits whose thermal protection is quickly lost due to compression during descent, provide little or no thermal protection. The purpose of the drysuit is simply to keep the diver dry. The garment we wear under the suit is responsible for keeping the diver warm. The warmth accomplished as a result of wearing divewear insulation is a function of the ability of the material to trap and hold air between the fibers.
YOU WILL HAVE AN UNCONTROLLED, FEET FIRST ASCENT TO THE SURFACE!
This is the most common fear expressed by non-drysuit divers. Nearly every diver who has expressed this fear claims to have had or has seen someone have this problem. When questioned in more detail about the actual sequence of events, most of these stories are actually in the "a friend had it happen to them" or "I heard it from a diver I know" category. On only one or two occasions have I actually talked to someone who claims they have had this happen to them. On those rare occasions the person frankly admitted they were at fault since they improperly operated the equipment or didn’t take the time to be trained in the proper procedures.
First, if properly operated, the amount of air required to obtain neutral buoyancy from the suit is minimal.
Proper weighting in a drysuit is achieved by the diver entering water too deep to stand up in, holding a normal breath, with no air in the BCD and minimal residual air in the drysuit. Remaining motionless, the diver would float at eyebrow level. A diver weighted in this manner would float at about mouth level if a lung full of air was taken in and would slowly descend if the "normal" breath were exhaled. This is neutral buoyancy. 
Excess air in the suit does not increase the insulation value of the divewear. Proper weighting is important to keep the bubble small.
The bubble described above could not, under most circumstances, cause the diver any concern. Also, since the diver is neutrally buoyant it doesn’t matter what attitude (head up, butt up, feet up or belly up) they are in. Neutrality is neutrality and nothing during the dive changes the laws of physics and allows the attitude to change the buoyancy of the diver. Only in extremely shallow water (5 metres or less) would there be a significant change of volume due to a diver changing from horizontal to vertical.
A properly trained diver is taught to respond to an "over inflation" emergency in the very unlikely event it should happen. More than over, most modern drysuits are equipped with adjustable dump valves that will expel air as quickly as the inflator will put air into the suit when the exhaust valve is positioned at the highest point in the suit. Second, it is a simple procedure to disconnect the power inflator should it get stuck in the open position Third, and by no means less important, is the fact that a diver trained properly in a drysuit is taught to recover from a (falsely induced) feet up, positively buoyant situation. Recovery is accomplished within a minimum of vertical movement.
One suit manufacturer has installed exhaust valves in the ankles of the suit to combat this "mythical" problem. All this does is perpetuate and give credence to a problem that really doesn’t exist. Additionally, the diver with these valves loses the air in the suit each time their feet get above the level position. This requires constant replacement of the air in the suit to maintain constant volume, avoid squeeze and achieve neutral buoyancy. The important point is that by installing these valves, that manufacturer lends credence (by putting equipment on the suit designed to combat the problem) to the myth of an uncontrolled feet first ascent. Also worthy of note is that the valve is positioned high enough on the ankle that a large bubble would still form in the boots.
DRYSUITS ARE DIFFICULT TO DON AND REMOVE
All a diver has to do is try on a drysuit and the myth is dispelled.
At the entry level, if a student is allowed to don a modern drysuit immediately after struggling in and out of a typical wetsuit, the dive student will probably ask to be allowed to take their course in the drysuit.
Almost everyone who has taken his or her entry-level course in a wetsuit can remember the difficulty in donning and removing the wetsuit.
FOAM NEOPRENE NECK AND WRIST SEALS ARE MUCH BETTER
In some special cases this statement may be true. As a rule, however, foam neoprene is not the best choice.
Many pieces of diving equipment are designed to fulfill the same objective. In each case, the determining factors are the pros and cons of each when applied to a specific situation.
The major advantage of foam neoprene seals is that they are somewhat more durable in regard to abrasion.
The negative aspects of foam neoprene seals, in all applications, make them the poorer choice overall. Foam neoprene is much more difficult to don and remove due to the thickness of the rubber and the fact that foam neoprene has a nylon covering on at least one surface.
Foam neoprene is purported to be warmer than latex. This is only slightly true. If the diver does not descend then the inherent insulation in foam neoprene is a factor. Since divers do descend, the compression of foam neoprene negates the insulation. Only because the material, even when compressed at depth, is thicker is there any insulation value.
Since foam neoprene compresses at depth, the seal that is water tight on the surface may leak when compressed. The continuous compression and expansion (descending and ascending) of foam neoprene are the primary reasons foam neoprene drysuits or wetsuits do not last as long as Trilaminate or Compressed Neoprene. The same is true with foam neoprene seals.
Foam neoprene has a memory. This fact is evident even in the instructions furnished with the seals. If the foam neoprene seal is too tight we suggest the customers "stretch" the seal (neck) over a scuba cylinder overnight. This actually destroys some of the closed cells thus permanently rendering the seal larger. If left to compression and expansion the same thing would happen naturally.
High quality latex has very little memory. It will, after stretching, go back to the original shape more readily. Since latex is considerably thinner it is more comfortable simply from a standpoint of bulkiness. If properly maintained, latex will last longer than foam neoprene that is dived frequently. Proper maintenance includes proper trimming, (so there are no "saw tooth" edges that lead to tearing) rinsing, dusting with talcum powder when storing for long periods and storing in "low ozone" areas.
Since latex seals are made in a cone shape, they are "trimmable" to fit the individual. Care must be exercised to not trim too much off at one time. The seals have "guide lines" to help in the trimming process. Only one line should be removed at a time and the seal should be tried on after each line is trimmed.
DRYSUITS ARE TOO EXPENSIVE!
The initial up-front cost of the modern drysuit is somewhat more that the typical wetsuit. Just as in any investment the price of the item is only one part of the equation. Modern drysuits, with the exception of foam neoprene suits, will last so much longer that the effective cost of the suit is much less. Just as with any item that depreciates, the cost should be divided by the number of uses the item returns. Dividing the cost of the drysuit by the number of dives a diver will get from the suit will yield a "cost per dive" figure. In most all cases the "cost per dive" will be considerably lower in a modern drysuit than a wetsuit (except for foam neoprene).
Economics and "just the facts" don’t take into consideration the increased degree of comfort achieved by the drysuit diver. Imagine all of the different things in our lives that we could actually do without but, because we want to be more comfortable, we decide to obtain the item or convenience. Diving, for most people, is an exhilarating experience and if those in wetsuits realized how much more enjoyable their dives would be if they were warm and comfortable most would invest in a drysuit immediately.
Another thing that many people don’t realize is that if a diver is warm they are much more efficient. Even those who claim they don’t get cold suffer a decrease of efficiency by losing body temperature to the environment. In almost every dive accident recorded, cold can be identified as a factor. The first thing a diver loses as a result of a drop in body temperature, is mental acuity. The recognition of a potential problem can go unnoticed because being cold slows the mental process. The second symptom of temperature drop is the loss of physical dexterity. The ability to take proper action to avert the results of a problem is lost. Many divers lose dexterity without even knowing they are being adversely affected by a loss of temperature.
DRYSUITS ARE FOR PROFESSIONALS AND ADVANCED DIVERS ONLY!
People who express this opinion need only analyze the statement. Of course, those who know most about diving and who are doing it most frequently will gravitate to the most efficient and most comfortable way to achieve the desired results. If I wanted to improve my methods I would first look to see how those who do it best are doing it. The best reason for professionals or advanced divers to dive in drysuits is that they know most about it and do it more frequently. An endorsement of this type by a professional should be viewed as an unquestionable testimony.
Simply stated, the fact that professionals and advanced divers use drysuits is the best reason for all divers to use drysuits.
IF THE SUIT FLOODS IT WILL DRAG YOU TO THE BOTTOM!
In the past people were warned, "never wear hip boots in a boat or around deep water. If you fall in the boots will fill with water and drag you down." To dispel this myth in training lifeguards one of the exercises used is to have trainees don hip waders and swim lengths of the pool. Although the boots make it more difficult to swim gracefully there is no need for additional effort to remain afloat.
If an object displaces an amount of water weighing more than the object, the item will float. If the item immersed in water is water the displacement is exactly equal and the result is neither positive nor negative buoyancy.
Recreational divers should always wear a Buoyancy Compensation Device (BCD). Regardless of the method employed to maintain temperature equilibrium the BCD would be used for surface support and in the event of any emergency.
THERE IS NO SUCH THING AS A DRYSUIT. THE BEST YOU CAN HOPE FOR IS "SEMI-DRY"!
In the past this statement was more credible than it is today. First, there is no such thing as "semi-dry." A person is either dry or they are wet.
Modern drysuits are made to totally exclude water. If the system is properly operated it will keep the diver dry. If the suit is poorly maintained, ill fitted, improperly donned or incorrectly used there is a chance that the user will get wet. In almost every case where the diver in a drysuit gets wet one of the mentioned items is at fault.
DRYSUITS CAUSE A LOT MORE DRAG AND REQUIRE A LOT MORE WEIGHT!
The additional drag caused by the modern drysuit is nearly undetectable. The drag caused by the scuba equipment itself far outweighs any drag caused by the suit that the typical diver would be hard-pressed to detect any change. This is not to say that an expert who is accustomed to swimming in a current would not be able to detect a difference. More important than the drag in some drysuits, is the fact that the diver’s "range of motion" is adversely effected.
When selecting a drysuit the purchaser should be asked to perform a series of exercises designed to assess the ability to perform some simple motions:

• raise the leg so that the foot is level with the knee of the other leg
• perform a "figure four" (such as the figure four used to don fins)
• reach the back of the neck with both hands
• touch hands together stretched overhead
• in a kneeling position, sit back towards the feet

The above "range of motion" exercises should be performed with the divewear and again with the divewear insulation and the drysuit together. None of the equipment should impede the diver’s ability to do the "range of motion" exercises. A high-quality drysuit will allow the diver to do all of these exercises unencumbered.
One of the greatest advantages to a drysuit is that on each dive the diver is allowed to take into consideration: 1) temperature of the water 2) the diver’s metabolic rate at the time of the dive and 3) the rate of exercise performed on this dive. As these items vary, so does the diver’s ability to vary the divewear insulation under the drysuit. Generally with a wetsuit the diver is either too warm or too cold.
As far as weight is concerned, the drysuit diver is able to adjust the amount of weight in accordance with their thermal needs. The more thermal protection they use the more weight is necessary.
It is impossible to generalize weight requirements. Due to the wide variation of body composition there is no general rule of thumb. Each diver must weight themselves according to their needs. However, to say that a diver needs much more weight with a drysuit is incorrect.
DRYSUITS ARE ONLY FOR EXTREMELY COLD WATER!
In the entry-level course the students are taught that water conducts heat 25 times faster than air. This means that if a body is immersed in water colder than body temperature heat is being drawn away from the body 25 times faster than if the body were surrounded by air. In cold climates windows are installed with "twin panes" since it is generally accepted that a dead air space insulates most efficiently. Household insulation, cold weather sleeping bags and numerous other heat retention items base their insulatory value on their ability to trap air.
It simply makes better sense to select the most efficient method to retain heat in any endeavor. Based on this logic it is easy to conclude: if there is a need for thermal protection while diving, a drysuit, since air is the insulator, is always a better choice than a wetsuit.
One of the best attributes of a high quality, well fitted wetsuit is that it excludes water from most of the body and prevents the "flushing" of water in areas where water is not excluded. This is more evidence indicating that if the diver totally excludes water from the system it would be more efficient.
Since the divewear the diver wears under the drysuit provides the thermal protection and the amount of protection is variable according to the three things mentioned earlier, the chances of a drysuit diver being uncomfortable are minimized. This is true for all temperatures of water from ice diving to, in some cases, eighty-degree water.
DRYSUIT DIVING IS TOO TECHNICAL FOR THE RECREATIONAL DIVER!
Early on all scuba diving was thought to be too complicated for recreational divers. In all facets of scuba diving the proper procedures must be followed. Drysuit diving is no different. It is no more or less complicated than diving with a BCD. When the first BCD was introduced, many people in the dive education community pointed and laughed at the new divers showing up in BCD’s. Many thought they were cumbersome, complicated, bulky and dangerous. To introduce them to a new diver would be task loading and asking for trouble. Today the training organizations all require the use of a BCD in dive training. Entry level students trained in drysuits tend to accomplish buoyancy skills with much less trouble and much more accuracy. Divers trained in drysuits tend to dive more often, take more courses, purchase more equipment and are less likely to become an "occasional" or "dropout" diver.